今天!!高職時同對電腦有興趣的同學, 也是目前現在的同事!!!!!結婚了(OS:今年第二顆紅色炸彈)
去喝他的喜酒, 早上快10左右小戴打來問我要怎麼去草屯!也順便起來準備了
本來是打算坐車過去草屯的!可是剛好當兵的阿夫上線(點放@@啥本島義務役的兵有點放的)
聊了一下結果太晚了! 想說還要到干城坐車可能會太晚只好直接騎著我10幾年老車的小50飆過去
中投街二高的交流道蓋好後還沒騎過中投說, 退伍後到現在也還沒騎這我的小50跑那麼遠過
11點多才從我這出發, 11點半左右騎到中投大里出口那接到了小戴的電話說他已經到了(OS:啥你也太早到了!), 好吧繼續飆!我剛好12點多一點就到達宴客地點了, 小汶給的地圖畫的太略了!我還以為雙喜楓林餐廳就在那一塊上!!結果他標示的那一塊正確地點是在另一邊, 小戴太早到了先去草屯接上的書局逛了!
等他回餐廳才一起進去, 宴客地點是在餐廳二樓, 好像28桌吧! 桌桌滿..
原來小相(公司另一個同事)已經到了, 坐公司桌(PS桌上的牌子把公司名稱打錯了!還真好笑少兩撇)
大概 12:30 左右終於開桌了, 吃到 1:30左右 公司其他同是才到 結果當然沒位子了橋旁邊的位置坐
吃完2點左右離開會場, 小戴一出去就跑錯邊往左轉出去了,他跑太快了才要跟他說右轉...
草屯市中心那一塊的路我還有稍微知道怎麼走..明明 右轉過兩個路口再右轉直直走就好了!(他要從省道回台中), 我則依樣走中投回到大里出口只有 2:20幾分@@?比去還快, 回來徒中順道也繞過去我的房子那邊拍了幾張照才回來現在住的地方 朝馬
總結: 婚禮會場太多人了冷氣不夠冷有點熱, 但是菜還不錯吃出菜速度不像之前下高雄參加新山婚禮依樣了!沒那麼快只能說剛剛好
2007年9月30日 星期日
2007年9月5日 星期三
NETGEAR 8 Port Gigabit Switch 開箱&測試報告
作者:
星夜如雨
傍晚才PO說在來台路上!沒想到晚上就接到房東電話說有我的包裹...
8月24日凌晨1點多在露天上下單, 早上7點多匯款, 在上午10點快半收到賣家確認收款
8月29日下午快半的時候收到通知今天由美國出貨
9月4日 今天到了
訂單確認後到美國出貨5天~美國飛到台灣6天, 付款後共11天收到這樣算快還是慢呢?
Netgear GS108 8-Port 10/100/1000 Copper Gigabit Ethernet Switch
第一次拍開箱

空氣包填充空隙

包裝還有封膜

另一邊

拉出來後, 保證服務卡&說明書 (事實上本來前面還有拍兩三張不過光線不足湖掉了)

GS108本體&裝變壓器盒子&壁虎螺絲(這都有附耶!要壁掛用)

跟 Sparklan WX6615GT 疊疊樂! 阿勒失焦了

跟阿爾卡特白龜(ATU-R)比厚度

在一張斜角拍

疊到會不定時當機的Buffalo 10/100M Switch上, 這台就是買來要取代掉它的

翻過來看看標籤, 沒開閃光有點失焦, 阿勒! MIC..

看看屁屁長啥樣!網路上找到的照片都沒有拍屁屁的!

第一次看到Switch上有外接地的地方!還有防盜孔喔!可以上鎖

跟羅技雷射鼠比一下大小

從另一邊的角度拍, 真的很小喔!

看看前面,小歸小標示的還很清楚

嘿嘿!只有屁股兩顆小螺絲所以! 脫光光來看看..

來一下電容特寫, 有兩種電解電容!不過我看不出來這到底是哪家的~不知道好還是不好

剛看變壓器盒子以為變壓器很大吧!! 實際上也只是小小一個

一樣 Made In China啦! 現在全世界變壓器幾乎都是 MIC的也沒啥好希奇的

OK!! 看圖說故事完畢!
在來是傳輸測試 一樣我用 iperf 做測試
速度看起來是OK的! 合格
--
從開始寫這篇,接上到現在用熱電偶溫度計量了一下
外殼溫度 38度左右
我這室溫內溫度 31度
順便量看一下 Sparklan WX6615GT 上面溫度最高那一點 約37度多
沒照片啦! 相機沒電了! 充電器持續失蹤中...還在考慮是否在買個 可以充Panasonic DMC-FZ1電池 BM7的台製充電器
or 直接敗一個用 8顆18650鋰電池外接電力盒..
8月24日凌晨1點多在露天上下單, 早上7點多匯款, 在上午10點快半收到賣家確認收款
8月29日下午快半的時候收到通知今天由美國出貨
9月4日 今天到了
訂單確認後到美國出貨5天~美國飛到台灣6天, 付款後共11天收到這樣算快還是慢呢?
Netgear GS108 8-Port 10/100/1000 Copper Gigabit Ethernet Switch
第一次拍開箱

空氣包填充空隙

包裝還有封膜

另一邊

拉出來後, 保證服務卡&說明書 (事實上本來前面還有拍兩三張不過光線不足湖掉了)

GS108本體&裝變壓器盒子&壁虎螺絲(這都有附耶!要壁掛用)

跟 Sparklan WX6615GT 疊疊樂! 阿勒失焦了

跟阿爾卡特白龜(ATU-R)比厚度

在一張斜角拍

疊到會不定時當機的Buffalo 10/100M Switch上, 這台就是買來要取代掉它的

翻過來看看標籤, 沒開閃光有點失焦, 阿勒! MIC..

看看屁屁長啥樣!網路上找到的照片都沒有拍屁屁的!

第一次看到Switch上有外接地的地方!還有防盜孔喔!可以上鎖

跟羅技雷射鼠比一下大小

從另一邊的角度拍, 真的很小喔!

看看前面,小歸小標示的還很清楚

嘿嘿!只有屁股兩顆小螺絲所以! 脫光光來看看..

來一下電容特寫, 有兩種電解電容!不過我看不出來這到底是哪家的~不知道好還是不好

剛看變壓器盒子以為變壓器很大吧!! 實際上也只是小小一個

一樣 Made In China啦! 現在全世界變壓器幾乎都是 MIC的也沒啥好希奇的

OK!! 看圖說故事完畢!
在來是傳輸測試 一樣我用 iperf 做測試
NETGEAR 8 Port Gigabit Switch
Model: GS108
D:\>iperf.exe -s
------------------------------------------------------------
Server listening on TCP port 5001
TCP window size: 8.00 KByte (default)
------------------------------------------------------------
[748] local 192.168.2.1 port 5001 connected with 192.168.2.10 port 1292
[ ID] Interval Transfer Bandwidth
[748] 0.0-10.0 sec 335 MBytes 282 Mbits/sec
[760] local 192.168.2.1 port 5001 connected with 192.168.2.10 port 1293
[ ID] Interval Transfer Bandwidth
[760] 0.0-10.0 sec 537 MBytes 449 Mbits/sec
[716] local 192.168.2.1 port 5001 connected with 192.168.2.10 port 1294
[ ID] Interval Transfer Bandwidth
[716] 0.0-10.0 sec 382 MBytes 320 Mbits/sec
[748] local 192.168.2.1 port 5001 connected with 192.168.2.10 port 1295
[ ID] Interval Transfer Bandwidth
[748] 0.0-10.0 sec 537 MBytes 450 Mbits/sec
[720] local 192.168.2.1 port 5001 connected with 192.168.2.10 port 1296
[ ID] Interval Transfer Bandwidth
[720] 0.0-10.0 sec 364 MBytes 305 Mbits/sec
D:\>iperf.exe -s -w 9.6k
------------------------------------------------------------
Server listening on TCP port 5001
TCP window size: 9.60 KByte
------------------------------------------------------------
[756] local 192.168.2.1 port 5001 connected with 192.168.2.10 port 1298
[ ID] Interval Transfer Bandwidth
[756] 0.0-10.0 sec 865 MBytes 725 Mbits/sec
[712] local 192.168.2.1 port 5001 connected with 192.168.2.10 port 1299
[ ID] Interval Transfer Bandwidth
[712] 0.0-10.0 sec 858 MBytes 720 Mbits/sec
[724] local 192.168.2.1 port 5001 connected with 192.168.2.10 port 1300
[ ID] Interval Transfer Bandwidth
[724] 0.0-10.0 sec 833 MBytes 699 Mbits/sec
[732] local 192.168.2.1 port 5001 connected with 192.168.2.10 port 1301
[ ID] Interval Transfer Bandwidth
[732] 0.0-10.0 sec 865 MBytes 725 Mbits/sec
[748] local 192.168.2.1 port 5001 connected with 192.168.2.10 port 1302
[ ID] Interval Transfer Bandwidth
[748] 0.0-10.0 sec 846 MBytes 709 Mbits/sec
D:\>iperf.exe -s -w 130k
------------------------------------------------------------
Server listening on TCP port 5001
TCP window size: 130 KByte
------------------------------------------------------------
[748] local 192.168.2.1 port 5001 connected with 192.168.2.10 port 1303
[ ID] Interval Transfer Bandwidth
[748] 0.0-10.0 sec 1.09 GBytes 932 Mbits/sec
[760] local 192.168.2.1 port 5001 connected with 192.168.2.10 port 1304
[ ID] Interval Transfer Bandwidth
[760] 0.0-10.0 sec 1.10 GBytes 941 Mbits/sec
[716] local 192.168.2.1 port 5001 connected with 192.168.2.10 port 1305
[ ID] Interval Transfer Bandwidth
[716] 0.0-10.0 sec 1.10 GBytes 941 Mbits/sec
[728] local 192.168.2.1 port 5001 connected with 192.168.2.10 port 1306
[ ID] Interval Transfer Bandwidth
[728] 0.0-10.0 sec 1.09 GBytes 936 Mbits/sec
[760] local 192.168.2.1 port 5001 connected with 192.168.2.10 port 1307
[ ID] Interval Transfer Bandwidth
[760] 0.0-10.0 sec 1.09 GBytes 939 Mbits/sec
速度看起來是OK的! 合格
--
從開始寫這篇,接上到現在用熱電偶溫度計量了一下
外殼溫度 38度左右
我這室溫內溫度 31度
順便量看一下 Sparklan WX6615GT 上面溫度最高那一點 約37度多
沒照片啦! 相機沒電了! 充電器持續失蹤中...還在考慮是否在買個 可以充Panasonic DMC-FZ1電池 BM7的台製充電器
or 直接敗一個用 8顆18650鋰電池外接電力盒..
訂閱:
文章 (Atom)